8"x18" Dia. Loading Unit, 20 Loads Per Hour with 100Lb Loads Capacity, 220/440V 3PH

1 - Leon J Barrett CO Centrifugale olieafscheider

Hilco Industrial

Westfalia

Make Westfalia, Type SAK-20036, No 1643130, New unknown, Separator (1x), Motor 30,0 KW, 380 Volt, Max. rotor speed 4500 Rpm, Floorspace 1,8x1,5 M, Total height 1,5 M, Weight 2000 KG

Westfalia SAK-20036 - Afscheider

Foeth

Serial number 343, 3.5 kW, working range cutting grinding of rod material up to 30 mm diameter, cycle time infinitely adjustable from 3 to 30 sec., cutting wheel: aluminium oxide with special rubber bond, material feed: pneumatically controlled cycle feed, cut-off length up to max. 200 mm, cut-off length adjustable on micrometer screw, incl. coolant device

MAX RAWYLER SCHWEIZ AWT-5V-SCC Automatische uitschakelmachine

Surplex

With suction, can be swivelled by 60°, boom 2000 mm

Afsnijmachine

Serial number 1027, counter reading 637945, suitable for a diameter from 3 to 32 mm standard material, rubber bonded cut-off wheels, outside diameter 304 mm or 254 mm, inside diameter 32 mm, incl. loading magazine

SOLING ASM 04 Precisie doorslijpmachine

Belt drive, on frame, probably self-construction

Scheiden machine

Alfa Laval

Make Alfa Laval Sweden, Type FESX-412B-35/4000-66, No 2947617, New unknown, Material Stainless steel, Separator (1x), Motor 37,0 KW, 380-415 Volt, Floorspace 1,7x1,2 M, Total height 1,7 M

Alfa Laval FESX-412B-35 - Afscheider

Make GEA Westfalia Separator AG, Type OSC-4-91-006, No 1718823, New 1998, In a very good (like new) condition, Material Stainless steel, Separator "Self cleaning disk separator (1x), Motor 3,0 KW, 400/690 Volt, Max. rotor speed 9980 Rpm, Floorspace 0,9x0,4 M, Total height 0,8 M, Weight 300 KG, Extra Specifications - With tools and many spare parts

GEA Westfalia OSC-4-91-006 - Afscheider

Make CINC - Costner Industries Nevada Corporation, Type Model V5-HPHT (High Pressure High Temp.), No 05HPHT01, New 2001, Material Stainless steel 1.4404 (316L), Separator "Centrifugal Separator (1x), Motor /drive unit make Fluid, type MD-55.22, Max. rotor speed 3600 Rpm, Mounted on stainl. steel frame , Floorspace 0,6x0,6 M, Total height 1,7 M, Extra Specifications - Max. pressure 20 bar (test pressure 27,3 bar) - With jacket (I= 2,5 + 0,8 Ltr va

Cinc Nevada V5-HPHT - Afscheider

Eisele

EISELE VMS1SPV Zaagsnede

Technical specifications
 
 
 Workpieces:
 
 
 
 
 
 to diameter
 
 20 mm
 
 
 
 clamping range
 
 12 mm
 
 
 
 separation length
 
 225 mm
 
 
 
 Spindle speed:
 
 
 
 
 
 infinitely variable
 
 
 
 
 
 from
 
 420 rpm
 
 
 
 to
 
 4200 rpm
 
 
 
 operating pressure
 
 5 - 6 bar
 
 
 
 Connection 50 Hz 3x
 
 380 volts
 
 
 
 Engine speed
 
 1400 rpm
 
 
 
 power
 
 0.37 kW
 
 
 
 Machine weight approx.
 
 370 kg
 
 
 
 Dimensions machine:
 
 
 


FLEURY 188-0-P | Ripper | Gebruikte / gebruikte gereedschapsmachine

Muller Machines SA

Technical data Workpieces: from diameter 0.8 mm to diameter 18 mm Lengths from 10 to 600 mm Cutting disc diameter: to 100 x 1.0 mm Bore 20 mm Number of cutting discs 1 x grinding wheel diameter 100 x 50 x 20 mm Spindle speed: from 2160 rpm to 4450 rpm min Connection 50 Hz 3x 380 Volt Dimensions machine: Length 900 mm Width 600 mm Height 1200 mm Various accessories: Coolant system

HASCO A 190 | Ripper | Gebruikte / gebruikte gereedschapsmachine

Serial No.. 10424 Main motor: 5,5 kW, Cutting disc dimensions: 350 x 2,6 x 25,4, Table contact area: 120 x 60 x 80 mm, Disc height over table: 260 mm, Height adjustment of disc: 320 mm, Workpiece feed in: 3000 mm, Workpiece feed out: 4000 mm, Measuring system not activated

SILVERCUT RS-350N Abrasive Wet Metaalsnijmachine

Manual cut of Saw. Motor power: 2HP. Plate diameter: 250 mm.

ALBRICH SA Y-100 Afgesneden zaag

Meyer

Technical data Cutting disc diameter: up to 160 mm Number of cutting discs 1 Spindle speed: from 1600 rpm to 2240 rpm Connection 50 Hz 3x 380 Volt Power 3 HP Machine weight approx. 600 kg Dimensions machine: Length 1500 mm Width 1300 mm Height 2050 mm

MEYER BURGER QS 2 | Ripper | Gebruikte / gebruikte gereedschapsmachine

SAFAG

Technical data Cutting disc diameter: from 100 mm to 220 mm Number of cutting discs Path of the table 60 mm Spindle speed: from 3500 rpm Connection 50 Hz 3x 380 Volt Power 2.0 PS Machine weight approx. 410 kg Dimensions machine: Length 1200 mm Width 600 mm Height 1600 mm

SAFAG 3210 S / Omnistep 301 S | Ripper | Gebruikte / gebruikte gereedschapsmachine

Technical Data Cutting disc diameter: from 110 mm to 220 mm Number of cutting discs Distance of the table 60 mm Spindle speed: from 3500 rpm Connection 50 Hz 3x 380 Volt Power 2.0 PS Machine weight approx. 410 kg Dimensions machine: Length 1200 mm Width 600 mm Height 1400 mm

SAFAG 3210 | Ripper | Gebruikte / gebruikte gereedschapsmachine

Marvel

METAL CUTTING BAND SAW ***THIS ITEM WAS DAMAGED IN THE 2019 IOWA FLOOD.  CONDITION IS UNKNOWN BUT SELLER STATES ITEM WAS UNDER WATER.  YEAR MODELS, HOURS OR CONDITION CANNOT BE VERIFIED.  HIGH BIDDER IS BUYING AS IS WHERE IS WITH ANY AND ALL FAULTS. BID ACCORDINGLY. ***

MARVEL-SERIE 8 MARK III SN: 840495

Marvel 8 Mark III

Proxibid, Inc.

Cub Cadet Compact Utility Diesel Tractor W/Loader, 364 Hrs Showing, MFWD, 1.5L Diesel Engine, 32 Hp, Power Shift Series, 833 Front Loader, 5’ Bucket, 3 Point Hitch, 540 PTO, Front 20 X 8.5-12, Rear 10-16.5 NHS, SN: 037501-0D125202

Gebruikte Scheidingsmachines te koop— 17